PENGARUH MODERASI SAFETY CULTURE TERHADAP HUBUNGAN REQUEST FOR INFORMATION (RFI), RISK MANAGEMENT DAN PROJECT COMPLETION
DOI:
https://doi.org/10.32500/jebe.v7i1.9758Keywords:
Request for Information, Risk Management, Safety Culture, Project Completion, Structural Equation ModelingAbstract
Penelitian ini bertujuan untuk menganalisis pengaruh moderasi Safety Culture (SCO) terhadap hubungan antara Request for Information (RFI) dan Risk Management (RMA) dengan Project Completion (PCO) pada PT Design XYZ. Penelitian menggunakan pendekatan kuantitatif dengan teknik pengumpulan data melalui penyebaran kuesioner kepada 127 karyawan, dan diperoleh 98 responden yang datanya dianalisis menggunakan metode Structural Equation Modeling - Partial Least Square (SEM-PLS). Seluruh indikator dalam model terbukti valid dan reliabel. Hasil analisis menunjukkan bahwa RFI dan RMA memiliki pengaruh positif dan signifikan terhadap PCO. Namun, variabel Safety Culture tidak memoderasi hubungan antara RFI dan PCO, tetapi terbukti memoderasi hubungan antara RMA dan PCO. Nilai R-Square sebesar 43,7% menunjukkan bahwa model memiliki kekuatan prediksi yang sedang (moderate). Temuan ini membuka peluang bagi penelitian lanjutan untuk mengeksplorasi faktor-faktor kontekstual lain yang berpotensi memberikan kontribusi lebih besar dalam memperkuat hubungan antar variabel. Risk Management terbukti berkontribusi signifikan terhadap keberhasilan penyelesaian proyek, dan pengaruh ini diperkuat oleh peran moderasi Safety Culture. Secara manajerial, hasil penelitian ini menekankan pentingnya pengelolaan RFI yang tepat waktu dan akurat, serta penguatan sistem manajemen risiko yang sistematis dan terstruktur, guna memastikan kelancaran dan keberhasilan penyelesaian proyek di PT Design XYZ.
References
Afrianti, M. S., Suwandari, Y. D., & Aulady, M. F. (2023). Analisis Faktor-Faktor Penyebab Pekerjaan Ulang atau Rework pada Proyek Konstruksi. Spektrum Sipil, 10(2), 153-164.
Aibinu, A. A., Carter, S., Francis, V., & Vaz-Serra, P. (2020). Request for information frequency and their turnaround time in construction projects: A data-analytic study. Built environment project and asset management, 10(1), 1-15.
Alrizal et al., F. C. (2020). Identifikasi faktor penyebab keterlambatan waktu dan mutu pekerjaan pada Proyek Ruko Green Junction Citraland. Jurnal Iptek Media Komunikasi Teknologi, 24(1), 53-58.
Asnada, R. T. (2024). The effect of corporate social responsibility disclosure, firm size, and financial factors on profitability of telecommunication companies. Doctoral dissertation, Sekolah Tinggi Manajemen IPMI, 1(2), 1-16. https://repository.ipmi.ac.id/2533/.
Azhagan, C. T., & Samritha, R. (2024). Request for Information (RFI) and Request for Quotation (RFQ) Practices in Automobile Industry. Iconic Research and Engineering Journals, 7(10), 158-162.
Azhagan, C. T., & Samritha, R. (2024). Request for Information (RFI) and Request for Quotation (RFQ) Practices in Automobile Industry. Iconic Research and Engineering Journals, 7(10), 158-162.
Aziz dan Hakam, R. d. (2016). Exploring Delay Causes of Road Construction Projects in Egypt. Alexandria Engineering Journal, 55(2), 1515-39.
Fatchurohim, N. R., & Taufik. (2024). Analysis of Factors Affecting the Backlog Close-Out Project and Its Implications on the Performance of Non-Financial Engineering Departments in Petrochemical Companies. seybold report, 19(1), 652-674.
Fauzi, M. D., & Dahda, S. S. (2023). Implementasi Metode House of Risk Pada Evaluasi Keterlambatan Proyek Cable Tray Support di PT. SSS . Jurnal Serambi Engineering, 7(4), 6890-6899.
Feng, Y. P., Wu, G. Y., & Zhao, D. (2017). Risk-compensation behaviors on construction sites: Demographic and psychological determinants. Journal Management Engineering, 33(4)1-15. 04017008. https://doi.org/10.1061/(ASCE)ME.1943-5479.0000520.
Feng, Y., & Trinh, M. T. (2019). Developing Resilient Safety Culture for Construction Projects. Journal of Construction Engineering and Management, 145(11), 1-15. DOI: 10.1061/(ASCE)CO.1943-7862.0001720.
Ghozali, I. (2018). Aplikasi Analisis Multivariate dengan Program IBM SPSS 25. Semarang: Badan Penerbit Universitas Diponegoro.
Gujarati, D. N. (2009). Basic Econometrics, 5th Edition. US: McGraw-Hill: ISBN 978-0-07-337577-9.
Hair, J. F. (2021). Partial Least Squares Structural Equation Modeling (PLS-SEM) Using R. Cham: Springer, 1(1), 1/15.
Hair, J. H. (2017). Primer on Partial Least Squares Structural Equation Modeling (PLS-SEM), Second ed. California: Sage Publication.
Hair, J. R. (2019). When to use and how to report the results of PLS-SEM. European Business Review, Emerald Publishing Limited, 31(1), 1-15. https://doi.org/10.1108/EBR-11-2018-0203.
Halpin, D. W., Senior, B. A., & Lucko, G. (2017). Construction Management (Fifth Edition). New Jersey: John Wiley & Sons, ISBN: 978-1-119-25680-9.
Henseler, & Sarstedt. (2014). A new criterion for assessing discriminant validity in variance-based structural equation modeling. Journal of the Acad, Mark. Sci., 43(1), 115-135.
Lachowicz. (2018). A Novel Measure of Effect Size for Mediation Analysis. Psychological Methods, 23(2), 244–261.
Lavery, M. R. (2019). Number of predictors and multicollinearity: What are their effects on error and bias in regression?. Communications in Statistics-Simulation and Computation, 48(1), 27-38.
Mboy et al., ,. F. (2021). Analisis Faktor Penyebab Pekerjaan Ulang (Rework) pada Proyek Bangunan Gedung di Yogyakarta. Jurnal EQUILIB, 2(1), 67-76.
Morales, F., Herrera, R., Rivera, F., Atencio, E., & Nunez, M. (2022). Potential Application of BIM in RFI in Building Projects. Buildings, 12(145), 1-25.
Nilsson, M. G. (2016). Policy: Map the interactions between Sustainable Development Goals. Nature, 534(7607), 320. https://doi.org/10.1038/534320a.
Ogbeibu, S. J. (2021). Leveraging STARA competencies and green creativity to boost green organisational innovative evidence: A praxis for sustainable development. Business Strategy and the Environment, 30(5), 2421-2440.
Ome, F., Tuloli, M. Y., & & Sumaga, A. U. (2025). Evaluasi Resiko pada Konstruksi Proyek Pembangunan Gedung Kantor Pengadilan Tata Usaha Negara Gorontalo. Research Review: Jurnal Ilmiah Multidisiplin, 4(1), 149-156.
Pradhan, P. C. (2017). A systematic study of Sustainable Development Goal (SDG) interactions. Earth’s Future, 5(11), 1169–1179. https://doi.org/10.1002/2017EF000632.
Project Management Institute, P. M. (2017). A Guide to the Project Management Body of Knowledge (PMBOK Guide) (Sixth Edition). Pennsylvania.: PMI, Inc., ISBN: 978-1-62825-184-5.
Rauzana dan Usni, A. d. (2020). Kajian Faktor-Faktor Penyebab Rendahnya Kinerja Mutu pada Proyek Konstruksi di Provinsi Aceh. Jurnal Media Komunikasi Teknik Sipil, 26(2), 267-274.
Sankar, D., & Shashikanth, K. (2022). Risk Management in Construction Industry. International Journal of Research Publication and Reviews, 3(5), 3008-3017.
Santoso et al, P. F. (2025). Teknik Industri Manajemen dan Optimalisasi Sistem. Bengkulu: Qianzy Sains Indonesia. https://qianzysains.com/mainsite/buku/Home/detailBuku/126.
Santoso, B. (2025). Faktor-faktor yang Mempengaruhi Efisiensi dan Kinerja Bank Umum Syariah Indonesia: Two-Stage Method. Journal of Economic, Business and Engineering (JEBE), 6(2), 288-297.
Santoso, B., & Kasih, T. P. (2024). Green Lean Concept for Measurement of Sustainable Performance Mediated by Organizational Culture in Oil & Gas and Petrochemical Industry. International Review of Management and Marketing, 14(5), 88-100. https://doi.org/10.32479/irmm.16621.
Santoso, B., dewi, F. m., Yusmaniarti, Wanget, S. A., Nirawati, R., & Utomo, B. (2024). Metode Penelitian. Bengkulu: CV. Qianzy Sains Indonesia; https://www.qianzysains.com/mainsite/buku/Home/detailBuku/65.
Santoso, B., Dewi, F. m., Yusmaniarti, Wanget, S. A., Nirawati, R., & Utomo, B. (2024). Metode Penelitian. Bengkulu: CV. Qianzy Sains Indonesia; https://www.qianzysains.com/mainsite/buku/Home/detailBuku/65.
Santoso, B., Fithri, P., Nurmalawati, Tampubolon, J., & Andriani, A. C. (2025). Teknik Industri Manajemen dan Optimalisasi Sistem. Be.ngkulu: Qianzy Sains Indonesia. ISBN : 978-623-89769-6-6.
Santoso, B., Sidharta, E. A., & Wardini, A. K. (2020). The impact of Fundamental Factors on Stock Return of Engineering and Construction Services Companies. Jurnal Organisasi dan Manajemen, 16(2) 2020, 158-170.
Sarstedt, M., & Joseph F. Hair, J.-H. C.-M. (2019). How to Specify, Estimate, and Validate Higher-Order Constructs in SEM-PLS. Australasian Marketing Journal, 1(1), 1–24.
Satoto, H. F., & Khoiroh, S. (2018). Confirmatory Factor Analysis pada Keselamatan Kerja di Perusahaan Konstruksi Jawa Timur. urnal Teknologi dan Terapan Bisnis (JTTB), 1(2), 66-75.
Sekaran, U., & Bougie, R. (2017). Metode Penelitian untuk Bisnis: Pendekatan Pengembangan-Keahlian, Edisi 6, Buku 1, Cetakan Kedua. Jakarta Selatan 12610: Salemba Empat.
Shim, E., Carter, B., & Kim, S. (2016). Request for Information (RFI) Management: a Case Study. The Associated Schools of Construction (Annual International Conference Proceedings), 5(2), 1-9.
Shuen, Y. S. (2018). Safety communication, safety culture, and safety leadership on safety participation among manufacturing employees. Malaysia: Universiti Teknologi Malaysia.
Sianturi, P. C., & Jin, O. F. (2024). Analisis Risiko Proyek Jaringan Transmisi dengan Metode Decision Tree dan Expected Monetary Value. Jurnal Mitra Teknik Sipil, 7(4), 1193-1206.
Siregar, W. R., Machfudiyanto, R. A., & Prasetyo, B. &. (2024). Enhancing Safety Culture Among Subcontractors to Improve Safety Performance in the Indonesian Construction Industry. International Journal of Safety & Security Engineering, 14(6) 1913.
Sugiyono. (2019). Metode Penelitian Kuantitatif, kualitatif dan R and D. Bandung: Alfabeta.
Tang, Z. (2025). Safety Culture in The Construction Industry: A Proposed Enhanced Safety Management Program. Journal of Business and Management Studies, 7(1): 98-125. DOI: 10.32996/jbms.2025.7.1.7.
Tang, Z. (2025). Safety Culture in The Construction Industry: A Proposed Enhanced Safety Management Program. Journal of Business and Management Studies, 7(1), 98-125.
Tehrani, V. Z., Rezaifar, O., Gholhaki, M., & Khosravi, Y. (2019). Investigating factors of safety culture assessment in construction industry projects. Civil Engineering Journal, 5(4), 971-983.
Trinh, M. T. (2019). Framework for measuring resilient safety culture in Vietnam’s construction environment. Journal Constr. Eng. Manage, 145(2), 1-15.
Wetzels, M., Odekerken-Schroder, G., & Van Oppen, C. (2009). Using PLS path modeling for assessing hierarchical construct models: Guidelines and empirical illustration. MIS quarterly, 3(1), 177-195.
Widhiawati, I., Wiranata, A., & Wirawan, I. (2016). Faktor-Faktor Penyebab Change Order pada Proyek Konstruksi. A Scientific Journal of Civil Engineering, 20(1), 1-7.
Yamin, S. (2023). Snart PLS-3 Third ed. Jakarta: PT Dewangga Energy International.
